VX CAD-CAM Logo
Any: Find articles with any keyword.
All: Find articles with all keywords (in any order).
Exact: Find articles with exact keywords (complete title must match exactly).
Title: Search titles only.
Content: Search article content only.
Both: Search both Articles and Content.
  VXCAD Base                   Jump to:
 
Knowledge Base Home Home | Articles Status Status | Knowledge Base Index Index | Sign Up as Writer Sign Up | Knowledge Base Glossary Glossary | Contact Us Contact Us
Home > All Categories > 15. VX Drafting > 05. Sheet Geometry > GD&T Symbols
Question Title GD&T Symbols

In this Article:

 

GD&T Symbols

Insert > Dimensions > GD&T (Drawing Sheet Level)

Use the following commands to create GD&T (Geometric Dimensioning and Tolerancing) symbols. These symbols are used at the Drawing Sheet Level to create a dimensioning scheme that adheres to the ANSI Y14.5 standard. GD&T symbols, frames, datums and targets can be created. In each case, the Text and Dimension Editor is used to create the actual symbols.
 
 
 

GD&T Feature Control Symbol

GD&T Feature Control SymbolThis command creates a GD&T feature control symbol (FCS). Enter the FCS text or pick the folder icon to use the Text and Dimension Editor. Select a base point to locate the symbol.
 

Optional Inputs  Required Inputs

  • FCS text
    The FCS text you created using the Text and Dimension Editor.  It will be shown here.  You can change it here if you wish.

  • Base point
    Select the base point for the FCS.

 

Optional Inputs  Optional Inputs

  • Leader Points
    If you want the symbol attached to one or more leader arrows, select the points to locate the arrows.

  • Location
    The default location of the symbol is to the right of the leader line. You can use this option to insert additional location points to relocate the symbol.

 

Notes  Notes

  1. The horizontal leader extension is automatically placed on the left side of the symbol.

  2. Use the Dimension Attributes Form to turn the All Around-Profile symbol on or off.

  3. Pick the Toggle Grid (Ctrl+G) icon from the Tool Bar to turn the drawing grid on. This will aid in creating leader points.

 

GD&T Datum Feature Symbol

GD&T Datum Feature Symbol GD&T Datum Feature SymbolThis command creates a GD&T datum feature symbol and extends it from a selected point. You can enter the datum text string directly or right-click and select Editor to use the Text and Dimension Editor. Then specify the text point to locate the symbol. Optionally, you can choose to display the datum feature triangle.
 

Optional Inputs  Required Inputs

  • Datum text
    Enter the datum text here or right-click and select Editor to use the Text and Dimension Editor.

  • First point
    Select the base point on the view to start the DFS.  Refer to the example illustration above.

  • Text point
    Select the point to locate the DFS text.

 

Optional Inputs  Optional Inputs

  • Datum feature triangle
    Check this box to include a datum feature triangle.  Refer to the example illustration above.

 

GD&T Datum Target Point Symbol

GD&T Datum Target Area Symbol (at Location) GD&T Datum Target Area Symbol (at Location)This command creates a GD&T datum target point symbol at a specified location. Specify the GD&T datum target text using the Text and Dimension Editor and then specify the target and text points.
 

Optional Inputs  Required Inputs

  • Datum text
    The DTPS text you created using the Text and Dimension Editor.  It will be shown here.  You can change it here if you wish.

  • Target point
    Select the target point on the view to start the DTPS leader line.

  • Text point
    Select the point to locate the DTPS text.

 

GD&T Datum Target Area Symbol

GD&T Datum Target Area Symbol (at Circle) GD&T Datum Target Area Symbol (at Circle)This command creates a GD&T datum target area symbol and attaches it to a circle. Specify the GD&T datum target text using the Text and Dimension Editor and then select the circle and text point.
 

Optional Inputs  Required Inputs

  • Datum text
    The DTAS text you created using the Text and Dimension Editor.  It will be shown here.  You can change it here if you wish.

  • Target entity
    Select the target point on any 2D entity to start the DTAS leader line.

  • Text point
    Select the point to locate the DTAS text.
Authored by: VXCADBase Help-Desk
Click Here to View all the articles in 05. Sheet Geometry category.
File Attachments File Attachments
There are no attachment file(s) related to this article.
Article Information Additional Information
Article Number: 576
Created: 7 Mar, 2008 2:51 PM
Last Modified: 13 Jul, 2009
Rating 5 Stars
Article Options Article Options
Print Question Print this Article del.icio.us Bookmark del.icio.us Bookmark
Email Question Email this Article to Friend Digg It Digg It
Export to MS Word Export to MS Word Furl It Furl It
Bookmark Article Subscribe to Article Subscribe to Article
 
Related Questions Related Articles
  1. Geometry Symbols (2D)
  2. Geometry Groups (2D)
  3. Layout View Box (2D)
  4. Hatch Patterns (2D)
  5. Insert Image Symbol
  6. Quick Draw
 
 

Powered by VX CAD/CAM